SIGNAL INPUT
Thermistor Types/Temperature Ranges
44004, 44005, 44006, 44007, 44016, -80º through +150ºC (-112º through 302ºF)
44008, 44032 -40º through +150ºC (-40º through 302ºF)
44018, 700 -30º to +100ºC (-22º through 212ºF)

Isolation

354 V peak per IEC spacing

NMR- 60 dB

CMR- 120 dB

Protection
Maximum 100 mA input current

Display
LED 14-segment, 13.8 mm (0.54")

ANALOG TO DIGITAL
Technique: Dual slope, polarity automatic
Internal resolution: 15 bits
Read Rate: 3/sec

ACCURACY AT 25░C ▒.2ºC
Temperature Repeatability: ▒.1ºC

Temperature Stability: 0.05ºC/ºC
Step Response Time: 4 to 5 seconds
Warm Up to Rated Accuracy: 30 min

ANALOG OUTPUT (Optional)
Signal Type: Current or voltage

Signal Level

Current: 10 V max compliance at 20 mA output

Voltage: 20 mA max for 0-10 V output

Linearity: 0.2%

Step Response Time:
1-2 seconds to 99% of the final value

INPUT POWER INFORMATION
Voltage

AC - 115/230 Vrms ▒15%, 230 V rms ▒10%

DC - 9.5 to 32 V dc

Frequency: 50-60 Hz
Power: 6 watts.

ENVIRONMENT
Operating Temperature:
0░ to 50░C (115/230 V rms ▒15%)
0 to 60░C (115/230 V rms ▒10%)

Storage Temperature: -40░ to 85░C
Relative Humidity: 90% at 40░C (non-condensing)

MECHANICAL
Panel cutout: 1/8 DIN 3.62" x 1.78" (45 x 92mm)
Weight: 1.27 lb (575 g)
Case material: Polycarbonate, 94 V-O UL rated

ALARM OUTPUTS (Optional):
2 Form "C" on/off relays. Configurable latched or unlatched by software.
Max current: 6 AMPS
Max voltage: 250 Vac or 30 Vdc